Knowledge Base:  
You are here: Knowledge Base > 911
KLA Strut Brace Installation - 911
Last Updated: 04/09/2013

Author: Skip

Installation:

  1. Remove front strut bolt and rear inner strut bolt.
  2. Place bracket, long leg of bracket toward front of car, over holes and replace bolts.
  3. Tighten to about 20 ft-lbs.
  4. Repeat for other side of car.
  5. Install bar and tighten.  Hardware order is: bolt/flat washer/bar/bracket/flat washer/lock washer/nut.
  6. Repeat for other side.
  7. Turn bar to take up "slack".  Tighten backing nuts.

Application: 911, 65-88

Credits: KLA Industries
 
Part # KLA_911SB



Was this article helpful?

Comments:
 

Related Articles
 > A-arm bushing modification (65-68 911/912)
 > Front Shock Replacement (65-89)
 > Front Torsion Bars (65-89)
 > Gate Shift Installation
 > KLA Strut Brace Installation - 964/993
 > OXS light reset
 > Window Express Kit Installation
 > Porsche Chronology
 > Seat Back Brace Installation Instructions
 > Tarett Engineering Rear Sway Bar Installation Instructions
 > Brey Krause Deep Sump Oil Pan Spacer Kit for Porsche 996, Boxster, Boxster S
 > RennShift 901 and 915 Installation Instructions (911 and 914 cars)