Clutch Alignment Tool
Fits 356 all; 911 1965-77 with 24 Spline Disc; 924 with 24 Spline Disc 1976-81
For clutch disc alignment. Brand Kingsborne. Don't guess or use trial and error on this critical step in setting up your clutch aligment, our Kingsborne Clutch Alignment tool will help you do the job right the first time.
Clutch Alignment Tool
Fits 911 1973-86 that uses 7/8" Hub Diameter with 20 spline disc
For clutch disc alignment. Brand Kingsborne. Don't guess or use trial and error on this critical step in setting up your clutch aligment, our Kingsborne Clutch Alignment tool will help you do the job right the first time.
Clutch Alignment Tool
Fits
- Porsche 911 1972-98 with 23 spline disc
- Porsche 911 Turbo 1976-91
- Porsche 924S 1986-88
- Porsche 924 Turbo 1980-82
- Porsche 928 1978-95
- Porsche 944 All including Turbo, S & S2
- Porsche 968 All
Clutch Clevis Fork at Pedal
Fits
- Porsche 356 all
- Porsche 911 1965-1986
- Porsche 911 Turbo (930) 1976-1988
- Porsche 912 all
- Porsche 914 all
Clutch Clevis Pin at Pedal
Fits
- Porsche 356 all
- Porsche 911 1965-1986
- Porsche 911 Turbo (930) 1976-1988
- Porsche 912 all
- Porsche 914 all
Clutch Disc - 930 type
Fits
- Porsche 911 Turbo (930) 1976-1989
- Porsche 911 Carrera 1987-1989 (G-50)
- Porsche 944 Turbo (alternate)
Clutch Kit
Fits Porsche 911 1987, 1988 and 1989; Carrera 4 (964) 1989
Clutch Release Arm
Fits
- Porsche 911 1987-1989*
- Porsche 911 Turbo 1989*
- Porsche 911 (964,993) 1989-1998
- Porsche GT2 2002-2009
- Porsche GT2RS 2011
- Porsche GT3/GT3RS 2004-2011
*Use with 964.116.710KIT Shaft/Bushing Kit
Clutch Release Bearing
Fits
- Porsche 911 1987-1993*
- Porsche 911 1994-1998
- Porsche GT2 2002-2009
- Porsche GT3 w/single mass flywheel 2004-2005
- Porsche GT3 2007-2011
- Porsche Turbo 2001-2013
- Porsche Turbo S 2005; 2011-2013
*Also use guide tube 950.116.813.06
Crankshaft Seal - Flywheel End
Fits
- Porsche 911 1978-1998
- Porsche 911 GT2 2001-2009
- Porsche 911 GT3 2003-2005
- Porsche 911 Turbo 2001-2009
- Porsche 924S/928/944/968 All
- Porsche 930 1978-1979
Flywheel Bolt
Fits
- Porsche 911 1978-1989
- Porsche 911 Turbo (930) 1978-1989
- Porsche 924S/944/944S/944S2 All
Flywheel w/o Ring Gear
Fits Porsche 911SC 1979 from Engine #6292281 (except CA); Engine #6591576 (CA only), 1980-1983
Pilot Bearing
Fits
- Porsche 356 All
- Porsche 911 1987-2001
- Porsche 911 Turbo 1989
- Porsche 911 GT3 2007
- Porsche 912 1966-1969
- Porsche 924S/924 Turbo/928/944/968 All
Pressure Plate
Fits 911 87-89; 911 1989 (964)
List Price: $536.71
Our Price: $465.15
You save $71.56!
Rubber Stop for Clutch Pedal
Fits
- Porsche 356 all
- Porsche 911 1965-1986
- Porsche 911 Turbo (930) 1976-1988
- Porsche 912 all
- Porsche 914 all
Woodruff Key - Crank Shaft
Fits:
Porsche 356 all
Porsche 911 1970-1989
Porsche 964 All
Porsche 993 all
Porsche 996/997 Turbo 2001-2008
Porsche GT3 2001-2008